The article author is making several good pointers regarding How to Troubleshoot and Repair an Electric Water Heater in general in this content just below.
Many modern-day houses make use of an electric water heater for their furnace, because of its convenience and also simplicity of use. Nonetheless, just like any other electric home appliances, problems might occur with its use, unexpectedly. It can be truly frustrating to get up to a cool shower rather than a hot one or having your bathroom with water that isn't hot adequate or even also hot. Whatever the instance may be, hot water heater issues can be fairly stressful. Fortunately, we have actually made a checklist of possible solutions to your water heater concerns. There are a number of variables that could create a lot of these problems, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you switch off the primary power supply for safety and security. Whatever the problem is, getting it taken care of need to not position way too much of an issue if you comply with these actions:
Call An Expert:
If after changing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might require to get in touch with a professional plumber for a professional point of view. The problem with your heating unit could be that the cold and hot taps have been switched over or it might be undersized for the amount of warm water required in your home. Whatever the situation might be, a specialist plumber would assist fix the trouble.
Check Your Power Supply:
As fundamental as this might appear, it is very required. Without appropriate power, your hot water heater will not function. So the first thing to do when your water all of a sudden retires is to validate that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker tripped. If the breaker is the concern, merely turn it off and on once again. Change any kind of busted or damaged fuse. Test the appliance with power after these modifications to see if it's currently functioning.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might need to check the temperature settings on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This need to aid heat the water. Turn the circuit breaker back on and check if the problem has been fixed.
Inspect the Heating Element in the Water Heater:
If it's not a power issue, after that try taking a look at your heating element if it is still working. Evaluate each of your heating elements to be sure the problem isn't with any of them. If any one of them is damaged, change that component and afterwards examine whether the warm water is back on.
Final thought
Water heater problems are not always major. Many of them result from small problems like a blown fuse or damaged burner. Changing the malfunctioning parts should do the trick. However, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I came across that entry about No Hot Water — Water Heater Repair when doing a lookup on the web. For those who enjoyed our post if you please do not forget to share it. We recognize the value of reading our article about What Would Cause My Electric Water Heater to Stop Working?.
Book